Eibach PRO-KIT springs for the BRZ
A fixed lowering-spring set for the first-generation BRZ, with installation and alignment to plan together.
- PART NUMBER
- 82105.140
- PACKAGE COMPARED
- Set of four springs
Compatibility
Subaru BRZ · first generation · 2013–2020
2.0L first-generation BRZ; the manufacturer lists the Base application. Confirm your exact trim and damper setup with Eibach.
Manufacturer application source ↗Applications shown here are limited to the configurations we documented. Use the manufacturer’s vehicle selector and confirm your engine, transmission, trim and part number before ordering.
Overview
A set of four lowering springs for the listed BRZ application. Eibach identifies factory dampers as its test configuration. This is not an adjustable coilover kit.
Considerations
Lowering changes ground clearance and suspension travel. Check damper condition, wheel clearance and the manufacturer’s application-specific specifications before deciding on a drop.
Installation
Use an experienced suspension installer. Budget for labor and alignment, and follow the supplied bump-stop and dust-boot instructions. Inspect tire clearance after installation.
Stores & prices
82105.140 · Set of four springs · new condition
These are direct store links. Gearline currently earns no commission from them.
Offers cover only the stores listed here. Displayed prices are dated snapshots, not live quotes. Shipping, tax, membership discounts and installation are excluded. Confirm the final total and compatibility at checkout.
Related guides

First BRZ mods: match the change to your problem
A decision table for tires, suspension, wheels and sound, with the evidence to collect before and after a purchase.
Read the guide
Suspension quotes: compare the full installed cost
A worksheet for comparing spring and coilover quotes, including installation, alignment, missing items and a worked budget example.
Read the guide
Wheel offset: calculate inner and outer position changes
Compare wheel width and offset together with three worked examples, formulas for edge movement and a fitment-check record.
Read the guideSources
Product and application details checked 2026-10-02. This overview uses manufacturer documentation; Gearline has not tested this product or measured a performance gain.
- Eibach product and application specifications ↗Checked 2026-10-02
- Eibach installation instructions ↗Checked 2026-10-02